Able Laser Archer RGB 10000
10W in the small chassis — the most output available without moving up in size or weight.
Specification
- Output power
- 10000mW
- Beam divergence
- 1.2mrad
- Modulation
- Analog 50kHz
- Laser class
- Class IV
- Scanner
- 40kpps @ 8° ILDA
- Scan angle
- 60° max
- Cooling
- TEC Peltier, active heat/cool
- Mains
- AC 110–240V
- Power draw
- 350W max
- Dimensions
- 282 × 220 × 162mm (without yoke)
- Weight
- 8.3kg (without yoke)
- Ingress rating
- IP52
- Light source
- R 2500mW@638nm · G 3500mW@525nm · B 4000mW@450nm, multi-mode direct-inject
- Controller
- Pangolin FB4 or Moncha.net embedded controller — optional, specify at order
- Interfaces
- ILDA in (differential) and out, key switch, FDA scan-fail-safe, 3-pin XLR remote interlock, Neutrik powerCON
Detail
- Manufacturer-certified to FDA/CDRH and CE
- Supplied with AVP variance support and LSO service (see Compliance)
Specify at order
Embedded controller
None (ILDA only)Pangolin FB4Moncha.net
Optional on all Able projectors — not fitted as standard. Must be specified at order.
Datasheet
Pricing
Priced per project. Most of what we supply is configurable — pitch, cabinet size, span, footprint, finish — and unit cost drops as quantity rises. Tell us what you are building and we will price it properly, including freight, spares and commissioning.
Need it installed? Install, commissioning & service →
Only need it for the show? See lasers rental rates →